|
|
ARIZONA HOUSE OF REPRESENTATIVESFifty-sixth Legislature Second Regular Session |
House: TI DP 9-0-0-1 |
HB2232: railroad grade crossing; on-track equipment
Sponsor: Representative Longdon, LD 5
House Engrossed
Includes other on-track equipment into railroad safety statutes mentioning a railroad train.
History
When a person driving a vehicle approaches a railroad grade crossing, the driver of the vehicle must stop within 50 feet but not less than 15 feet from the nearest rail of the railroad and may not proceed if any of the following applies:
1) a clearly visible electric or mechanical signal device gives warning of the immediate approach of a railroad train;
2) a crossing gate is lowered, or a human flagman gives or continues to give a signal of the approach or passage of a railroad train;
3) a railroad train approaching within approximately 1,500 feet of the highway crossing emits a signal audible from such a distance and the railroad train is an immediate hazard because of its speed or proximity to the crossing;
4) an approaching railroad train is plainly visible and is in hazardous proximity to the crossing; or
5) any other condition exists that makes it unsafe to proceed through the crossing (A.R.S. § 28-851).
Provisions
1. Broadens railroad safety law relating to railroad crossings and railroad grade crossings to include other on-track equipment. (Sec. 1, 2, 3)
2. Makes technical changes. (Sec. 2, 3)
---------- DOCUMENT FOOTER ---------
HB 2232
Initials LM Page 0 House Engrossed
---------- DOCUMENT FOOTER ---------